This is an archive of the old PisteHors.com forum

News | Gear | Ski Areas | Hiking | Mountain Biking
Forum Home  >  General  >  Gear  >  Thread
Powered by Google™
   
 
Dynafit Rear Binding
 
greg smith
Posted: 24 January 2010 10:13 PM  
Newbie
Rank
Total Posts:  2
Joined  2010-01-24

There are three screws in the rear Dynafit binding. One is for length, another for DIN setting.
What is the third, recessed small screw for, please?

 
 
davidof
Posted: 24 January 2010 10:36 PM   [ # 1 ]  
Administrator
RankRankRankRank
Total Posts:  2234
Joined  2003-10-24

The small screw is the 2nd DIN setting. There is a rotative DIN setting which gives left/right release (and releases the toe) and an up/down release which sets the spring tension of the pins.

 
 
greg smith
Posted: 25 January 2010 07:34 PM   [ # 2 ]  
Newbie
Rank
Total Posts:  2
Joined  2010-01-24

Thanks so much! I have now made the adjustment and understand how it works.

Best!

 
 
   
 
 
‹‹ Marker M binding      Problems with downhill boots in Diamir Fritschi bindings ››